Email me newest jobs similar to this one
15 days ago
only 13 days until close

Lead Avionics Hanger


Marana Aerospace Solutions
Location: Arizona, United States
Job type: Contract/Locum
Contact: No Name
Category: Technician
Apply
Select how you want to share:
View similar
Description

I. JOB PURPOSE

To lead functions assigned in the inspection, testing, adjusting, assembly, disassembly, repair, cleaning, and calibration of aircraft avionics equipment.

II. WORKING CONDITIONS

Physical Demands: Requires sitting, standing and walking for extended periods

of time. Requires frequent bending, stooping, squating, crouching, kneeling, balancing and reaching above shoulder level. Requires occasional crawling, climbing, lifting, carrying, pushing or pulling weight up to 50 pounds. Requires eye-hand coordination and manual dexterity. Requires corrected vision and hearing to normal range.

Equipment Operated: Avionics testing equipment such as VOR/ILS tester, fuel quantity tester, DME tester, pitot-static tester, volt-ohm meter, hi-lifts, stands, ladders.

Work Location: Aircraft maintenance hangar, Flightline, Storage and Teardown.

Potential Hazards: Exposure to high intensity noise levels, extreme changes in temperature, electrical charges and radar waves, materials identified on Material Safety Data Sheets, working around moving machinery.

Protective Equipment Required: Goggles, safety glasses, face shields, ear protection, aprons, gloves, safety harnesses, breathing equipment.

III. JOB DUTIES AND RESPONSIBILITIES

Essential Job Functions:

Ensures that all work performed complies with applicable technical data, FAA regulations and Marana Aerospace policies and procedures

Works closely with immediate supervisor as well as Production Control Booth Coordinator to keep them informed on actual work progress in areas of responsibility.

Reviews non preplanned documents to identify methods of repair and/or replacement identifying necessary parts, materials and tooling requirements and provides timely estimates for all maintenance on non preplanned documents within scope of responsibility.

Responsible for the proper execution of parts tags attached to repairable, serviceable, or condemned parts.

Performs assigned maintenance work including inspection, testing, adjusting, and repairing avionics equipment, such as radar, radio, navigation, auto pilot, and compass systems, installed in aircraft.

Inspects components of avionics equipment for defects, such as loose connections and frayed wire, and for accuracy of assembly and installation.

Tests avionics equipment under simulated or actual operating conditions to determine performance and airworthiness, using test equipment, such as oscilloscopes, digital meters, counters, and circuit analyzers.

Adjusts, repairs, or replaces defective components based on analysis of test results, following blueprints, schematics, handbooks, and other technical documents.

Calibrates installed or repaired equipment to prescribed specifications. Performs orientation and on-the-job training for employees. Ensures that training is documented in employee training records

Enforces company policies and safety regulations and the proper use of equipment and ensures that quality standards are met.

Coordinates activities of workers including assigning work duties for maximum utilization of manpower and analyzing and resolving work problems.

Maintains communications within area of responsibility, informing employees as to plans and progress and promoting teamwork and cooperation.

Marginal Job Functions:

Tracks time spent on each work order and ensures the time is logged on time card correctly.

Makes recommendations to management to improve productivity, increase efficiencies, or cut costs.

Performs maintenance duties away from base on temporary duty.

Performs maintenance work such as repair and maintenance of company equipment and shop housecleaning.

Ensure that all work performed is done in a safe manner. Directs activities to protect employees from harm and maintain safe working conditions.

Qualifications

IV. JOB SPECIFICATIONS

Knowledge, Skills and Abilities: Ability to organize and plan work adhering to deadlines; attention to detail and mathematical skills; ability to read, write, and understand the English language and to follow and administer verbal and written instruction; ability to interpret and apply technical data relating to position; ability to safely drive and operate a standard shift automotive vehicle and other applicable equipment; ability to work with or without supervision.

Education/Training: High School diploma or equivalent required. Post-secondary education or training in aircraft maintenance or equivalent combination of education, training or experience required.

Experience: Three to five years experience in related aircraft avionics preferred.

Certificates/Licenses: A&P License required. FCC License preferred. Valid drivers license required.

Description

I. JOB PURPOSE

To lead functions assigned in the inspection, testing, adjusting, assembly, disassembly, repair, cleaning, and calibration of aircraft avionics equipment.

II. WORKING CONDITIONS

Physical Demands: Requires sitting, standing and walking for extended periods

of time. Requires frequent bending, stooping, squating, crouching, kneeling, balancing and reaching above shoulder level. Requires occasional crawling, climbing, lifting, carrying, pushing or pulling weight up to 50 pounds. Requires eye-hand coordination and manual dexterity. Requires corrected vision and hearing to normal range.

Equipment Operated: Avionics testing equipment such as VOR/ILS tester, fuel quantity tester, DME tester, pitot-static tester, volt-ohm meter, hi-lifts, stands, ladders.

Work Location: Aircraft maintenance hangar, Flightline, Storage and Teardown.

Potential Hazards: Exposure to high intensity noise levels, extreme changes in temperature, electrical charges and radar waves, materials identified on Material Safety Data Sheets, working around moving machinery.

Protective Equipment Required: Goggles, safety glasses, face shields, ear protection, aprons, gloves, safety harnesses, breathing equipment.

III. JOB DUTIES AND RESPONSIBILITIES

Essential Job Functions:

Ensures that all work performed complies with applicable technical data, FAA regulations and Marana Aerospace policies and procedures

Works closely with immediate supervisor as well as Production Control Booth Coordinator to keep them informed on actual work progress in areas of responsibility.

Reviews non preplanned documents to identify methods of repair and/or replacement identifying necessary parts, materials and tooling requirements and provides timely estimates for all maintenance on non preplanned documents within scope of responsibility.

Responsible for the proper execution of parts tags attached to repairable, serviceable, or condemned parts.

Performs assigned maintenance work including inspection, testing, adjusting, and repairing avionics equipment, such as radar, radio, navigation, auto pilot, and compass systems, installed in aircraft.

Inspects components of avionics equipment for defects, such as loose connections and frayed wire, and for accuracy of assembly and installation.

Tests avionics equipment under simulated or actual operating conditions to determine performance and airworthiness, using test equipment, such as oscilloscopes, digital meters, counters, and circuit analyzers.

Adjusts, repairs, or replaces defective components based on analysis of test results, following blueprints, schematics, handbooks, and other technical documents.

Calibrates installed or repaired equipment to prescribed specifications. Performs orientation and on-the-job training for employees. Ensures that training is documented in employee training records

Enforces company policies and safety regulations and the proper use of equipment and ensures that quality standards are met.

Coordinates activities of workers including assigning work duties for maximum utilization of manpower and analyzing and resolving work problems.

Maintains communications within area of responsibility, informing employees as to plans and progress and promoting teamwork and cooperation.

Marginal Job Functions:

Tracks time spent on each work order and ensures the time is logged on time card correctly.

Makes recommendations to management to improve productivity, increase efficiencies, or cut costs.

Performs maintenance duties away from base on temporary duty.

Performs maintenance work such as repair and maintenance of company equipment and shop housecleaning.

Ensure that all work performed is done in a safe manner. Directs activities to protect employees from harm and maintain safe working conditions.

Qualifications

IV. JOB SPECIFICATIONS

Knowledge, Skills and Abilities: Ability to organize and plan work adhering to deadlines; attention to detail and mathematical skills; ability to read, write, and understand the English language and to follow and administer verbal and written instruction; ability to interpret and apply technical data relating to position; ability to safely drive and operate a standard shift automotive vehicle and other applicable equipment; ability to work with or without supervision.

Education/Training: High School diploma or equivalent required. Post-secondary education or training in aircraft maintenance or equivalent combination of education, training or experience required.

Experience: Three to five years experience in related aircraft avionics preferred.

Certificates/Licenses: A&P License required. FCC License preferred. Valid drivers license required.

Apply

Email me newest jobs similar to this one

  Back to the top