Email me newest jobs similar to this one
15 days ago
only 13 days until close

Product Development Engineer II - MRB Electrical (2nd Shift)


Embraer
Location: Melbourne, Florida
Job type: Contract/Locum
Contact: No Name
Category: Engineers
Apply
Select how you want to share:
View similar

****This position is for 2nds shift - must be available for nights and/or weekends****

POSITION SUMMARY

  • Provide Material Review Board (MRB) engineering support for production line and flights as related Avionics and Electrical Systems (Avionics, CMS, Lighting, power Generation/distribution, Engine control, Entertainment, Fly-By-Wire, etc ) issues.

 

JOB RESPONSIBLITIES

  • Perform functional analysis for non-conformities based on design criteria and certification reports for Electrical and Avionics Systems issues.
  • Create software performance / certification reports for Airworthiness Representatives.
  • Aligns responsibility for technical dispositions of non-conformities.
  • Evaluate technical dispositions impact on production schedules, safety, quality aspects, documentation and costs/benefits involved.
  • Direct interface with other internal/external engineering areas involved with non-conformity analysis.
  • Substantiate the approval of non-conformities considered “major” and present it for the local authorities as required.
  • Facilitate dispositions for non-conformities detected on supplier components in case of Embraer’s design responsibility.
  • Validate  supplier’s  dispositions  for  non-conformities  in  case  such  supplier  is  not delegated as MRB.
  • Initiate the design revision process for those cases in which the disposition will affect interchangeability or maintainability of the product.
  • Process small drawing changes to correct any repetitive Non-Conformance MRB issues on the production Line.
  • Provide engineering support for trouble shooting on production line and production flights.
  • Apply technical principles, theories, and concepts to solve a wide range of challenging engineering problems
  • Responsible for compiling analytical results into a report format for customer review and approval.
  • Ensure project related engineering data is in compliance with corporate policies and certification requirements
  • Assigns responsibility for technical dispositions of non-conformities for the above systems on production line.
  • Elaborate dispositions for non-conformities detected on supplier components in case of Embraer’s design responsibility.
  • Start design  revision  process  with  engineering  staff  for  those  cases  which  the disposition will affect interchangeability or maintainability of the product.
  • Ensure project related engineering data is in compliance with corporate policies and certification requirements.
  • Provide mentorship, training, and guidance for junior engineers.

 

ESSENTIAL KNOWLEDGE, SKILLS AND ABILITIES

 

Education:

  • Must have a Bachelor of Science in an Engineering discipline is required (Electrical or Aerospace)

 

Experience:

  • Consultant Level Individual Contributor on a functional group.
  • Generally 3-5 years of experience in an aircraft systems functional discipline in an aerospace engineering related field.
  • Recent experience in aircraft systems.
  • Aircraft operation/maintenance (MCC) or production line experience desired (professional levels).
  • Prior MRB authorization preferred

 

Knowledge, Skills & Abilities:

  • Familiarity with Rockwell, Honeywell, and Garmin (G1000/3000) Avionics and Electrical systems.
  • Ability to analyze and interpret company products (e.g., analyzing and troubleshooting aircraft systems problems). 
  • Makes use of and applies job practices,  techniques,  standards, principles, theories, and concepts.
  • Knowledge of verification, validation, certification and qualification processes and procedures.
  • Understands governing regulations and compliance requirements.
  • RBAC23, Part 23. Part 25 (Airworthiness Standards);
  • ICAO doc 9760 (Airworthiness Manual).
  • Ability to assess and document test or analysis data to show compliance.
  • Skills to build and manipulate data sets, (e.g., compare CATIA to measurement data).
  • Knowledge of design concepts and techniques (e.g., concurrent engineering, Design for Manufacture/Assembly).
  • Knowledge of responsibilities and tasks performed by various Engineering departments/disciplines (e.g., design, test, software, technology, avionics.
  • Familiarity with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes.
  • Demonstrated knowledge of aircraft primary and secondary manufacturing, installation, and repair.
  • Proficient computer skills with use of Microsoft office applications.
  • Effective time management and organizational skills; ability to become involved in a number of projects in a fast paced work environment.
  • Ability to become involved in a number of projects in a fast paced team environment.
  • Highly motivated self-starter.
  • Customer focused with good relationship building skills.
  • Professional appearance and demeanor.
  • Must possess good written and oral presentation skills.
  • Portuguese or Spanish language skills a plus.

 

Working Conditions / Environment/ Special Requirements:

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • Employees will be subject to the random drug and alcohol testing under FAA regulations.
  • Availability for domestic and international travel.
  • Must be able to obtain a TSA/SIDA (Secure Identification Display Area) clearance to access secure areas.

 

GENERAL COMMITMENT

  • Commitment to company values and complies with department norms, policies, directives, and procedures.
  • Incorporates Lean and P3E processes and concepts into daily activities.
  • Strive for continuous improvement to processes and procedures.
  • Honors and protects confidential and proprietary documents and information.
  • Satisfies work schedule requirements.
  • The job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required by the employee. Performs other duties as assigned.

****This position is for 2nds shift - must be available for nights and/or weekends****

POSITION SUMMARY

  • Provide Material Review Board (MRB) engineering support for production line and flights as related Avionics and Electrical Systems (Avionics, CMS, Lighting, power Generation/distribution, Engine control, Entertainment, Fly-By-Wire, etc ) issues.

 

JOB RESPONSIBLITIES

  • Perform functional analysis for non-conformities based on design criteria and certification reports for Electrical and Avionics Systems issues.
  • Create software performance / certification reports for Airworthiness Representatives.
  • Aligns responsibility for technical dispositions of non-conformities.
  • Evaluate technical dispositions impact on production schedules, safety, quality aspects, documentation and costs/benefits involved.
  • Direct interface with other internal/external engineering areas involved with non-conformity analysis.
  • Substantiate the approval of non-conformities considered “major” and present it for the local authorities as required.
  • Facilitate dispositions for non-conformities detected on supplier components in case of Embraer’s design responsibility.
  • Validate  supplier’s  dispositions  for  non-conformities  in  case  such  supplier  is  not delegated as MRB.
  • Initiate the design revision process for those cases in which the disposition will affect interchangeability or maintainability of the product.
  • Process small drawing changes to correct any repetitive Non-Conformance MRB issues on the production Line.
  • Provide engineering support for trouble shooting on production line and production flights.
  • Apply technical principles, theories, and concepts to solve a wide range of challenging engineering problems
  • Responsible for compiling analytical results into a report format for customer review and approval.
  • Ensure project related engineering data is in compliance with corporate policies and certification requirements
  • Assigns responsibility for technical dispositions of non-conformities for the above systems on production line.
  • Elaborate dispositions for non-conformities detected on supplier components in case of Embraer’s design responsibility.
  • Start design  revision  process  with  engineering  staff  for  those  cases  which  the disposition will affect interchangeability or maintainability of the product.
  • Ensure project related engineering data is in compliance with corporate policies and certification requirements.
  • Provide mentorship, training, and guidance for junior engineers.

 

ESSENTIAL KNOWLEDGE, SKILLS AND ABILITIES

 

Education:

  • Must have a Bachelor of Science in an Engineering discipline is required (Electrical or Aerospace)

 

Experience:

  • Consultant Level Individual Contributor on a functional group.
  • Generally 3-5 years of experience in an aircraft systems functional discipline in an aerospace engineering related field.
  • Recent experience in aircraft systems.
  • Aircraft operation/maintenance (MCC) or production line experience desired (professional levels).
  • Prior MRB authorization preferred

 

Knowledge, Skills & Abilities:

  • Familiarity with Rockwell, Honeywell, and Garmin (G1000/3000) Avionics and Electrical systems.
  • Ability to analyze and interpret company products (e.g., analyzing and troubleshooting aircraft systems problems). 
  • Makes use of and applies job practices,  techniques,  standards, principles, theories, and concepts.
  • Knowledge of verification, validation, certification and qualification processes and procedures.
  • Understands governing regulations and compliance requirements.
  • RBAC23, Part 23. Part 25 (Airworthiness Standards);
  • ICAO doc 9760 (Airworthiness Manual).
  • Ability to assess and document test or analysis data to show compliance.
  • Skills to build and manipulate data sets, (e.g., compare CATIA to measurement data).
  • Knowledge of design concepts and techniques (e.g., concurrent engineering, Design for Manufacture/Assembly).
  • Knowledge of responsibilities and tasks performed by various Engineering departments/disciplines (e.g., design, test, software, technology, avionics.
  • Familiarity with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes.
  • Demonstrated knowledge of aircraft primary and secondary manufacturing, installation, and repair.
  • Proficient computer skills with use of Microsoft office applications.
  • Effective time management and organizational skills; ability to become involved in a number of projects in a fast paced work environment.
  • Ability to become involved in a number of projects in a fast paced team environment.
  • Highly motivated self-starter.
  • Customer focused with good relationship building skills.
  • Professional appearance and demeanor.
  • Must possess good written and oral presentation skills.
  • Portuguese or Spanish language skills a plus.

 

Working Conditions / Environment/ Special Requirements:

  • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
  • Employees will be subject to the random drug and alcohol testing under FAA regulations.
  • Availability for domestic and international travel.
  • Must be able to obtain a TSA/SIDA (Secure Identification Display Area) clearance to access secure areas.

 

GENERAL COMMITMENT

  • Commitment to company values and complies with department norms, policies, directives, and procedures.
  • Incorporates Lean and P3E processes and concepts into daily activities.
  • Strive for continuous improvement to processes and procedures.
  • Honors and protects confidential and proprietary documents and information.
  • Satisfies work schedule requirements.
  • The job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required by the employee. Performs other duties as assigned.
Apply

Email me newest jobs similar to this one

  Back to the top